Yes, willpower can produce short-term change, but it creates constant internal stress because you haven't dealt with the root cause. 的确,意志力可以带来短期的改变,但因为你没有先处理问题的根源,结果反而引起内在持续的压力。
It is found that the internal stress of the lining obtained by means of field monitoring is smaller than the strength of the concrete lining. 现场监测结果表明,衬砌施工后内部应力普遍较小,未超过混凝土强度。
Forging or casting aluminum must be heat retreated to release internal stress. 锻造、铸造铝合金必须经过热处理,以消除内应力。
It was shown that, internal stress of nano-diamond films increased with increasing methane concentration, higher substrate temperature and longer deposition time. 结果表明,随着甲烷浓度的升高、衬底温度的升高以及沉积时间的延长,金刚石涂层中的压应力增大。
The forming of white spots in forgings relates to its hydrogen content, the magnitude of the internal stress, the internal metallurgical quality and the compactness. 锻件材中白点的产生与其实际氢含量、内应力大小、锻件材内部的冶金质量及致密性有关。
The effect of internal stress on the crystallization of cis-1,4 polybutadiene 内应力对顺-1,4-聚丁二烯结晶的影响
Preparation and Study of Two Seamount Co-rich Crust PGEs Ultra-fine Reference Materials: MCPt-1 and MCPt-2 Internal Stress and Co Content of Pulse Electrodeposited Ni-Co Alloy Coatings 富钴结壳铂族元素超细标准物质的研制脉冲镀Ni-Co合金镀层内应力及钴含量的研究
Before the search of main fatigue failure modes, this paper added the critical failure internal stress criterion, reducing the calculation of recognition algorithms for identifying failure modes. 在主要疲劳失效模式搜寻前增加了临界失效内力判据,减小了识别失效模式算法的计算量;
FEM Analysis of internal Stress of Composite Ceramics and Its Toughness Mechanism 二相粒子复合陶瓷内应力的有限元分析及其增韧机理
Numerical Simulation and Analysis of Residual Internal Stress in Intricate Casting 复杂铸件残余内应力的数值模拟及分析
The relative internal stress of UV-curing coatings with bases is measured by using diffuse right polariscope WEM-300 based on the principle of photoelastic. 根据光弹原理,用漫射式振光弹仪测定了光固化涂层与基材的相对内应力。
Sensitivity index of external stress is much higher than that of internal stress. 对内应力的敏感程度用内应力敏感指数进行评价。
The machine is made from steel. It's vibration treated roil to reduce internal stress. 本机械为钢板结构,经振动时效消除内应力。
The Principle and Approach of Using Scattered Light Photoelasticity for Automatic Measuring of Internal Stress Field in 3-Dimensional Models 一种自动测定三维模型内部应力场的散光光弹性原理和方法
The reinforcing efficiency of fiber bundles or fiber sheet will be reduced as soon as they combine with epoxy because of internal stress. 纤维束或纤维布与树脂基体复合固化后,由于固化应力的作用,其增强效率将大大下降。
Lower molecular weight and broader molecular weight distribution in thermoplastics favor lower orientation and reduced internal stress in moldings. 在热塑性塑料中较小的分子量以及较宽泛的分子量分布促成方向性减少同时降低注塑件中的内应力。
Internal Stress and Co Content of Pulse Electrodeposited Ni-Co Alloy Coatings 脉冲镀Ni-Co合金镀层内应力及钴含量的研究
In the process of production, external stress does not change, while internal stress changes. 油气藏的外应力敏感指数远大于内应力敏感指数。
The cause analysis and solutions of early destroy of ABS plastic tubing internal stress ABS塑胶管内应力早期破坏的原因分析及对策
The research was carried out on the basis of CSR to measure creep internal stress. 主要阐述根据小冲杆试样实测中心挠度求蠕变应力的问题。
A Solution Method of the Bending Moment of the Statically Indeterminate Beam with Constant Cross Section and Single-span; Discussion on Internal Stress Diagram By Drawing Bending-moment Diagram 等截面单跨超静定梁固端弯矩的一种解法用剪力图面积法作静定梁的内力图的探讨
The normal deformation behavior of rock mass with voids and concrete filled solution cave in karst area influences directly the internal stress and safety of cable pylon and anchorage. 岩溶区空隙岩基和溶洞充填混凝土的变形特性直接影响索塔和锚碇的内部应力与安全使用。
Finite element simulation for internal stress of metal dusting corrosion layer 金属尘化腐蚀层内应力的有限元模拟计算
To remove internal stress such as those produced by drawing, bending, or welding. 去除内应力,如用冲压、完全或焊接成型的工件。
Being a kind of integrated structural parts, different thickness of WC cemented carbide layer has great effect on distribution of internal stress and dimensional stability. 作为一种整体结构件,在实际应用中碳化钨硬质合金层的厚度对部件的内应力分布以及尺寸稳定性有着重要的影响。
All steel welded structure, vibrating treatment of ageing for removal of internal stress, with good rigidity and stability. 全钢板焊接结构,综合处理(振动时效、热处理)消除内应力,有很好的刚性与稳定性。
That the internal stress is released strongly by heat treatment results in a decrease of the magnetic-field-induced strain. 热处理后,内应力大大降低,导致磁感牛应变降低。
The stress variation in the center is just opposite, and a structural type internal stress state is formed after quenching. 心部的应力变化正好相反,最终形成了组织应力型的内应力分布。
Aiming at the hazards of internal stress on the injection products, it studied to reduce and eliminate the internal stress. 文章针对内应力对注塑制品形成的危害,研究了减轻和消除内应力的方法。
For mass concrete construction, cement caused by hydration heat of concrete pouring temperature and internal stress of dramatic changes in temperature, is the main reason for cracks in concrete occur. 对于大体积混凝土建筑,水泥水化热引起混凝土浇筑内部温度和温度应力剧烈变化,是导致混凝土发生裂缝的主要原因。